Power amplifier of the English company Musical Fidelity.
Recommended component by HiFi Choice Recommended. A very good sounding model. The body of the amplifier is made in the same style for the entire M1 series. The M1 PWR is capable of delivering 65 watts per channel in stereo mode when operating into an 8 ohm load. Well, if you connect speakers with a resistance of 4 Ohms to it, the output power will increase twice to 130 Watts per channel.
Due to the high damping ratio, the Musical Fidelity amplifier can "rock" almost any acoustic system.
The improved signal / noise ratio (94 dB in "Stereo" mode and 100 dB in "Mono" mode) significantly expands the dynamic range of the amplifier, allowing it to reproduce the micro and macro dynamics of musical works of various genres as accurately as possible. The frequency response of the amplifier is practically linear in the entire operating range.
The Musical Fidelity M1 PWR switchboard has all the necessary ports for operation, including high-quality acoustic terminals. In addition, it is possible to combine two amplifiers for joint work with acoustics connected according to the BI-AMPing scheme.
The small dimensions of the M1 PWR with relatively high power are explained by the fact that it uses a pulse power supply unit. The amplifier is characterized by a clear and smooth midrange, well-controlled bass and crystal-clear highs. Excellent macro and microdynamics and good processing of the stage. Other features are also impressive, for example, such as very careful handling of the amplifier with the phase of the input signal. As a result, a high-quality integral sound is obtained at the output, devoid of parasitic phase fluctuations.

Features of the amplifier:

– high output power
- the possibility of working in monophonic amplifier mode with doubled output power
- low noise level
– linear frequency response
– low coefficient of harmonic distortions.

Specifications

Entrance. power:
– stereo mode 65 Watts (8 Ohms), 130 Watts (4 Ohms),
– mono mode 100 Watts (8 Ohms), 200 Watts (4 Ohms)
– Nonlinear distortion (NLD), noise: <0.03% (stereo), 94 dB (stereo), > 100 dB (mono)
– Frequency range: 20 Hz – 20 kHz (<0.5dB)
Inputs: 1 RCA stereo linear, 1 3.5 mm mono jack
Dimensions (WxHxD): 220 x 100 x 315 mm.