An integrated amplifier of the English company Myryad. In the device, the previous section and the final stage are located in the same body, although they are completely separated and connected using an external cable. This is an extremely powerful device that can cope with most acoustic systems. The available power reserve of 150 W per channel means that the amplifier without loss copes with sharp changes in the dynamic range and can easily control different acoustics. In fact, it is a pre-amplifier and two power monoblocks in one housing. There is a pure direct input directly through the volume control (for the shortest possible signal path).
The output resistance of the pre-amplifier is 220 ohms, ensuring that there are no unnecessary problems with the cable. The device provides a well-balanced and densely damped bass and transparent tops.
Design features
-8 line inputs, including a short "Line Direct" input
-Precise electronic volume control with low noise and low distortion
-Improved signal-to-noise ratio at low volume
-Precise volume adjustment in 0.5 dB increments
-Channel balance can be adjusted without affecting sound quality
-The volume "control" level can be set separately for each input so that all sources sound equally loud
-The preamplifier section has its own power transformer and 5 separate power regulators, each optimized for an individual task
-Each power amplifier channel is a completely separate module with its own power transformer
-High output current design supported by powerful output transistors and a massive (3.4kg) toroidal transformer for each channel
Vishay resistors with a tolerance of 0.1% provide an open, transparent and natural sound
-Each channel of the amplifier has its own monitoring of CPU temperature, output current and DC current. Any deviation causes isolation of its loudspeaker output and status indication on the front panel display
-5 individually regulated power supplies for each amplifier channel ensure that all low-level circuits have a clean, low-noise power supply, effectively isolated from the output stages
-Line output connector allows you to organize biamping.
-Bright blue vacuum fluorescent display (VFD), shows selected input and volume setting in 0.5dB increments and gives access to setup menu
-Large rotary volume control and menu navigation
-The menu allows individual adjustment of the level for each source, renaming of sources and fine tuning of channel balance

Specifications
Manufacturer Myriad
Series MX Series
Amplification channels 2
Power 8 Ohms 150 W
Frequency range 20 - 20000 Hz
Power 4 Ohms 230 W
Remote control
Dimensions 435 – 190 – 340 mm
Total harmonic distortion: 0.02%
Input sensitivity: 440mV (line)
Signal to noise ratio: 110dB (line)
Weight: 22 kg
Complete set - original packaging, passport, remote control, power cord