Integrated amplifier of the Japanese company S.E.C. A single-ended output stage operating in class A (Single Ended Clas A Power Amplifier). Soft tube sound.
The amplifier is a combination of a passive precursor and a final single-cycle transistor amplifier operating in class A. The design of the amplifier provides for the shortest signal path.
Fully balanced circuitry. The Load Effect Free technology, which is used in S.E.S. amplifiers, allows them to work without experiencing the "unpredictable" behavior of the load - acoustic systems. This exclusive “Load Effect Free” technology is a combination of a non-feedback Class A voltage amplifier and a current controller amplifier. This technical solution combines the advantages of a voltage amplifier with a minimum level of distortion and a system of stabilization and amplification of the output current. The new improved DIGM (digital intelligent gain management) technology allows you to avoid distortion of the input signal. The DIGM (digital intelligent gain management) technology allows you to reduce the mismatch between the left and right channels by 1 dB. when the volume is increased by 10 dB. Two-level input sensitivity system (0dB / + 6dB) for each input, specially designed to balance the output level between different devices.

Specifications:

Output Power: 64 W (8 Ohms), 85 W (4 Ohms)
Input sensitivity: XLR: 1.3 V / 47 kΩ, RCA: 0.65 V / 47 kΩ
Harmonic distortion: XLR 0.004%, RCA 0.01% (1 W / 1 kHz)
Frequency range: 20 Hz – 20000 Hz, + 0 / -0.07 dB, 5 Hz – 185 kHz, + 0 / -3 d
Signal to noise ratio: 105 dB (A-Weighted, 1 W)
Damping factor: 250 (1 kHz, 1 W)
Gain: XLR: 30 dB max., RCA: 24 dB max.
Analog inputs: XLRx1, RCAx4
Output for recording: RCAx1
Supply voltage: 220 V, 50 Hz
Dimensions: 435 (w) x 378 (d) x 102 (h) mm
Weight: 10.3kg
Color: Silver.