The Danish company Dynaudio has more than 30 years of history in the production of speaker systems. Strict quality control of production is carried out at all its stages, since all of them, from the production of housings and speakers to final assembly, are carried out in our own factories.
Acoustics retail $5,000. To achieve high strength and vibration resistance of the structure, the Dynaudio Contour 3.0 case is reinforced with internal ties in certain places.
The crossover unit is located in a separate chamber - thanks to this, it was possible to eliminate the influence of vibrations and resonances on the elements, as well as to use extremely short lengths of cables to connect the filters to the high-quality gold-plated WBT input connectors.
Thus, the sensitive elements of the crossover were isolated from any negative effects. The design of Contour 3.0 uses a high-frequency speaker with a double magnetic system - this guarantees it high power and precise control over the micro-movements of the emitting surface.
A special coating was applied to the tweeter membrane, which made it possible to obtain a flat frequency response even above 20 kHz without peaks and dips.
Other frequency bands are handled by two LF / MID drivers equipped with large conical diaphragms. Thanks to the use of two speakers, it was possible to achieve high power and accuracy of signal transmission of various amplitudes. The sound of the model is incredibly alive - but without the slightest instability, deep - but transparent, dynamic - but amazingly detailed.
Crystal purity of high frequencies is mesmerizing. It seems that the high-frequency range is simply limitless and the only limitation is only the peculiarities of human hearing. Connecting tube amplifiers makes high frequencies more "rounded" and gives them a little more softness, which primarily affects the reproduction of classical music and acoustic instrumental music.
The midrange is no less flawless. With the correct placement in the listening room, the impression is created that the sound is not tied to the speaker systems and exists separately from them. Male and female vocals sound very natural, the performer and all musical instruments have a stable location in space both across the width of the stage and in its depth. Especially the strengths of Contour 3.0. there is a reproduction of the piano, wind and string instruments. Subjectively, it seems that the sound is slightly pushed forward, which somehow moves the listener to the first rows of the concert hall.
Low frequencies are what all Dynauio speakers are famous for.
Dynaudio Contour 3.0 is excellent acoustics capable of revealing all the subtleties of music.

Specifications

Number of lanes: 3
Type of acoustic design: Phase inverter
Cutoff frequency, kHz: 0.4 / 2.3
Sensitivity, dB: 86
Nominal power, W: 200
Recommended amplifier power, W: 125
Frequency range, Hz: 30-21000
Nominal resistance, Ohm: 4
Height, mm: 1042
Width, mm: 218
Depth, mm: 360
Weight: 34 kg
Acoustic systems in very good condition. Excellent macro and micro dynamics. In fact, audiophile sound.