Phono corrector Clearaudio Nano Phono - was one of the best bestsellers of the German brand. Following on from this success, Clearaudio has created a new and improved version of this amplifier for analog turntables. This device has a new anti-resonant and non-magnetic body made of brushed aluminum with rounded corners.
Clearaudio Nano Phono V2 has nothing extra. External obstructions are no longer a problem with this superb product of Clearaudio engineering. The purity of the sound and the minimization of interference are facilitated by very short signal paths in the analog path, physical separation of channels (double mono architecture).
The Clearaudio Nano Phono V2 phono equalizer has nothing extra. External obstructions are no longer a problem with this excellent product of Clearaudio engineering. The purity of the sound and the minimization of interference are facilitated by very short signal paths in the analog path, physical separation of channels (double mono architecture) and carefully selected electronic components. Its carefully selected SMD components are assembled by hand in Erlangen, Germany and tested multiple times. The result of these efforts is a high signal-to-noise ratio of up to 84 decibels. The input impedance is set using additional jumpers, so there is no quality loss when using different MM or MC cartridges.

Characteristics
Type: phono stage
Schematics: semiconductor
Modules: MM/MS (switchable modes on the bottom panel)
Signal-to-noise ratio: 81 dB (MM) / 70 dB (MC)
Gain: 34 to 48 dB (MM)/54 to 68 dB (MC)
RIAA correction (delay time): 75 µs/318 µs/3180 µs
RIAA (accuracy): ± 0.4 dB
Maximum output level: 10.0 V (variable from 0 to 10)
KNI: <0.04%
Input Impedance*: 47kΩ (MM)/51Ω, 200Ω, 402Ω, 1kΩ (MC)
Channel separation: 80 dB
Inputs: 1 x RCA
Outputs: 1 x RCA (stereo), 1 x mini-jack (3.5 mm, for headphones)
Power: 2.3 W (maximum), 2.3 W (operational), less than 0.3 W (standby)
Weight: 0.5 kg (phono corrector and power supply)
Dimensions (W x H x D): 85 x 25 x 106 mm
Power supply: ± 18 V DC