AMPLIFIERS

SANSUI AU 907a Limited

$3,780
Company: SANSUI
Type: INTEGRATED
Design: SOLID STATE
Connection Input: RCA / XLR
Connection Output: BANANA - SPADE
Condition: Used
Return: Not accepted
Payment Option: By Arrangement
Shipping Option: Free Shipping
Shipping Price: -
TypeIntegrated amplifier
Power Amplifier Unit
Effective output (10 Hz to 20 kHz
Simultaneous operation on both channels)
6 Ω : 100W + 100W
8 Ω : 80W + 80W
Total harmonic distortion factor (at effective output)0.01% or Less (8 Ω)
Frequency Response (1W)DC ~ 300 kHz, + 0 -3dB
Cross modulation distortion factor0.01% or Less (8 Ω)
Damping factor150 (8 Ω)
Input Sensitivity / Impedance1V/5k Ω (1 kHz)
Signal-to-noise ratio (A network)120 dB or more
Dynamic Power6 Ω : 100W
4 Ω : 130W
2 Ω : 170W
TIM (SAWTOOTH)Measurement limit value or less
Slew rate200 V / μ sec
Rise time0.5 μ sec
<Pre-part>
Input Sensitivity / Impedance
(1kHz)
Phono MM : 2.5mV/47k Ω
Phono MC : 300 μ V/100 Ω
CD, Tuner, Line, Tape/DAT1 ・ 2 : 150mV/20k Ω
Phono maximum allowable inputMM(THD 0.01%):250mV
MC(THD 0.1%):25mV
Frequency Response (1W)Phono MM : 20 Hz to 20 kHz, ± 0.2 dB
CD, Tuner, Line, Tape/DAT-1 / 2 : DC ~ 300 Hz, + 0 -3dB
Signal-to-noise ratio (A network)Phono MM : 90 dB or more
Phono MC : 75 dB or more
CD, Tuner, Line, Tape/DAT-1 / 2 : 110 dB or more
Subsonic filter16 Hz (-3dB), 6dB/oct.
Loudness50Hz:+4dB
10kHz:+3dB
<General>
Rated power consumption280W
External dimensionsWidth 466x Height 166x Depth 453 mm
Weight34.0kg

0 Star

  • 0 / 5
Write a Rating
This seller has no rating yet